How to get IPTV on your Mag device

First of all turn your box over and on the bottom there is a mac adress.

it will begin with 00:1A:79 you need to send this to Admin along with how long of a subscription you want and if you want adult channels or not.

Step 1: Plug your MAG device into the power, connect the HDMI cable to the TV and box, connect the LAN cable from the router to the box or WIFI adapter to the box.


Step 2: When loaded up click ‘Settings‘

centered image

Step 3: Click on ‘System settings‘.

centered image


Step 3: Click on ‘Servers‘. Then ‘Portals‘.

centered image


Step 4: You will see ‘Portal 1 name‘ line Enter IPTV4ALL as the name
Below that you will see ‘Portal 1 URL‘, enter the URL you received from Admin or via Email.. centered image

Step 5: When you have done all of the above click ‘OK‘ on your remote to save the details.

Now press ‘EXIT‘ 2 times on the remote control and restart the portal.

You should now be ready to watch your Live UKTV.

NOTE: If you are using a MAG 250 or MAG 256 and your portal does not load it could be that the channels we have are too many for your device.
Let us know about this and we can deactivate most of the other countries that you would never use.

This will reduce the load on the mentioned devices and allow your system to work.

IPTV MAG Box – Your STB is Blocked

centered image

Should you see a message on your MAG Box once you have restarted the portal that says ‘Your STB is blocked, Call the provider’ don’t worry it is easy to solve.
It normally means that your MAC Address is not yet active or you have supplied an incorrect MAC code when registering with us.
If this is the case please double check the MAC Address underneath the MAG STB and send it to us again so we can add it for you.

Philosphers Stone.jpg

Membership Status

You don't have any active subscription